适用于法拉利 458 的 Designtek Exhaust 200 单元高流量运动催化转换器 - 3606009458
3606009458
Information
列出的商品是一对适用于 Ferrari 458 的优质 304 级不锈钢 200 Cell 运动猫。
#设计泰克#
适合原厂排气系统，也适合所有适合原厂猫的售后排气系统。
请注意： 运动型催化转化器或旁通管已获得型式认证，因此可能无法合法安装在 2001 年 3 月 1 日之后制造的车辆上。 它们不能在公共道路上使用，也不符合 MOT 标准，它们是为竞赛和赛道设计的仅限汽车。
#设计泰克#
适合原厂排气系统，也适合所有适合原厂猫的售后排气系统。
请注意： 运动型催化转化器或旁通管已获得型式认证，因此可能无法合法安装在 2001 年 3 月 1 日之后制造的车辆上。 它们不能在公共道路上使用，也不符合 MOT 标准，它们是为竞赛和赛道设计的仅限汽车。
€1,586.66
当前 €1,554.93
由供应商供货
相关产品
One-Touch Comfort-Softtop roof control for Convertible Ferrari 360 Spider and F430 Spider SmartTop
代码: STAFFI1
Information
The smartTOP roof control unit allows opening or closing the convertible top while driving at slow speeds. It works similar to power-windows and opens or closes the roof automatically at the touch of a button. It is not necessary to stop the vehicle and pull the handbrake to operate the roof.
Remote control of convertible top
Open/Close your convertible top using the original factory remote control key / key fob.
Open/Close the top while driving
Never have to stop again for your top: Open/Close your top while driving. Speed programmable up to 40kmh.
One-Touch power convertible top
"One-Touch" convertible top operation allows your top to open or close automatically.
Individually programmable
Configure all functions of the module to meet your personal preferences via USB setup.
Passive / Invisible mode
Turn the whole module off with an easy key sequence. Ideal when letting someone else drive your car.
Reversible plug-in installation
Remove any time allowing sale or return of a leased vehicle in its original condition.
Separate window control
Raise and lower the windows separately by remote without activating the top.
Top convenience mode
Turning the ignition on or off does not interrupt convertible top operation.
Invert switch logic
Direction of center console top switch can be changed to "pull to open" and "push to close".
Comfort window close
One-Touch operation when closing all windows simultaneously via the separate driver's door switch.
Keyless Go top control
Open and close the top by touching the door handle three times.
Plug-n-Play Wiring harness
Custom designed plug-in-between wiring harness for extremely simple and quick installation included.
USB Port for easy setup / updates
This module can be configured and updated using
any Mac or PC.
This Product Fits:
Ferrari 360 Spider and F430 Spider
Remote control of convertible top
Open/Close your convertible top using the original factory remote control key / key fob.
Open/Close the top while driving
Never have to stop again for your top: Open/Close your top while driving. Speed programmable up to 40kmh.
One-Touch power convertible top
"One-Touch" convertible top operation allows your top to open or close automatically.
Individually programmable
Configure all functions of the module to meet your personal preferences via USB setup.
Passive / Invisible mode
Turn the whole module off with an easy key sequence. Ideal when letting someone else drive your car.
Reversible plug-in installation
Remove any time allowing sale or return of a leased vehicle in its original condition.
Separate window control
Raise and lower the windows separately by remote without activating the top.
Top convenience mode
Turning the ignition on or off does not interrupt convertible top operation.
Invert switch logic
Direction of center console top switch can be changed to "pull to open" and "push to close".
Comfort window close
One-Touch operation when closing all windows simultaneously via the separate driver's door switch.
Keyless Go top control
Open and close the top by touching the door handle three times.
Plug-n-Play Wiring harness
Custom designed plug-in-between wiring harness for extremely simple and quick installation included.
USB Port for easy setup / updates
This module can be configured and updated using
any Mac or PC.
This Product Fits:
Ferrari 360 Spider and F430 Spider
€201.11
当前 €197.09
库存
ICarsoft Professional Diagnostic Tool CR Plus for Multi-brand Vehicles
代码: CRPLUS
Information
ICarsoft Professional Diagnostic Tool CR Plus for Multi-brand Vehicles
iCarsoft CR Plus is a well built comprehensive diagnosis instrument by iCarsoft.It's not only including full function of OBDII/EOBD,but also support more function of Four system( Engine, automatic transmission, anti-lock braking system and airbag ) of certain models of car, such as read and clear code, multi languages, data flow picture display, graph. It also includes Electronic Parking Brake (EPB) release, Steering Angle Sensor (SAS) and Oil Service Light resets. View Engine, ABS, SRS along with A/T enhanced data
Features & Benefits:
• OBDII diagnostic full function
• Multiple car models (covering over 40 prevailing models from Asia, America and Europe).
• Support 4 Systems: Engine, Transmission, ABS, and Airbag.
• Basic diagnostic functions: read DTCs, clear DTCs, and read data stream
• Support DTCs help, data stream wave display, history data record and replay
• Online upgrade, you can download the latest version anytime anywhere.
• Auto module search
• Enhanced OBDII Mode 6
• Supports vehicles 1996 & newer ( OBDII & CAN )
• Retrieves generic P0, P2, P3 & U0 codes,
along with manufacturer specific P1, P3 & U1 codes – both permanent & pending
• Read & Clear Check Engine Lights
• Turn off MIL & reset monitors
• Displays DTC definitions right on the screen
• View freeze frame data & I/M Readiness monitor status
• Display live PCM data stream & O2 Sensor test data
• Graph, record & replay data in full color
• Resets Oil Service Light
• Brake Pads Reset
• Steering Angle Sensor Calibration
• Code cause / solution tips guide users to the root cause of trouble codes faster, saving diagnosis and repair time
• Retrieves vehicle information ( VIN, CIN and CVN )
Twelve Super Advantages:
1. Read & Clear DTCs
2. Read Data Stream
3. Full ECU Diagnosis
4. Diagnose Multi-brand Models Equipped With OBDII-16 DLC
5. Easy To Use With Metal Dome Keys
6. Oil Light/Service Reset
7.Brake Pads Reset
8.Steering Angle Sensor Calibration
9. 4.0" TFT LCD With 480 * 320 Pixels
10. USB 2.0 High Speed Upgrade
11. Upgrade Via TF Card
12. Multi-language: English, French, Spanish, German, Italian, Russian and Dutch.
And for more, refer to User's Manual.
Specifications:
• Display: 4.0" TFT LCD , with 480 * 320 Pixels
• Operation Temperature: 0℃ -- 50℃
• Storage Temperature: -20 ℃ -- 70 ℃
• Power: 9V -- 18V
• Operating current: 150mA@12V(Typical)
• Power consumption: 1.8W(Typical)
• Dimension: 205mm*110mm*31mm(LxWxH)
• Weight: 350g
OBDII function:
1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are
operating properly and are ready for Inspection and Maintenance testing.
4. Data Stream
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by
the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of
the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently
performed tests from the vehicle's on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring
tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system.
Before using the system test function, refer to the vehicle's service repair manual to determine the procedures
necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification
number (CVN), and other information of the test vehicle.
Contents:
● Main Unit
● Hardcopy User's Manual
● Main cable
● USB cable
● TF Card
● Nylon carry case
● TF Card reader
iCarsoft CR Plus is a well built comprehensive diagnosis instrument by iCarsoft.It's not only including full function of OBDII/EOBD,but also support more function of Four system( Engine, automatic transmission, anti-lock braking system and airbag ) of certain models of car, such as read and clear code, multi languages, data flow picture display, graph. It also includes Electronic Parking Brake (EPB) release, Steering Angle Sensor (SAS) and Oil Service Light resets. View Engine, ABS, SRS along with A/T enhanced data
Features & Benefits:
• OBDII diagnostic full function
• Multiple car models (covering over 40 prevailing models from Asia, America and Europe).
• Support 4 Systems: Engine, Transmission, ABS, and Airbag.
• Basic diagnostic functions: read DTCs, clear DTCs, and read data stream
• Support DTCs help, data stream wave display, history data record and replay
• Online upgrade, you can download the latest version anytime anywhere.
• Auto module search
• Enhanced OBDII Mode 6
• Supports vehicles 1996 & newer ( OBDII & CAN )
• Retrieves generic P0, P2, P3 & U0 codes,
along with manufacturer specific P1, P3 & U1 codes – both permanent & pending
• Read & Clear Check Engine Lights
• Turn off MIL & reset monitors
• Displays DTC definitions right on the screen
• View freeze frame data & I/M Readiness monitor status
• Display live PCM data stream & O2 Sensor test data
• Graph, record & replay data in full color
• Resets Oil Service Light
• Brake Pads Reset
• Steering Angle Sensor Calibration
• Code cause / solution tips guide users to the root cause of trouble codes faster, saving diagnosis and repair time
• Retrieves vehicle information ( VIN, CIN and CVN )
Twelve Super Advantages:
1. Read & Clear DTCs
2. Read Data Stream
3. Full ECU Diagnosis
4. Diagnose Multi-brand Models Equipped With OBDII-16 DLC
5. Easy To Use With Metal Dome Keys
6. Oil Light/Service Reset
7.Brake Pads Reset
8.Steering Angle Sensor Calibration
9. 4.0" TFT LCD With 480 * 320 Pixels
10. USB 2.0 High Speed Upgrade
11. Upgrade Via TF Card
12. Multi-language: English, French, Spanish, German, Italian, Russian and Dutch.
And for more, refer to User's Manual.
Specifications:
• Display: 4.0" TFT LCD , with 480 * 320 Pixels
• Operation Temperature: 0℃ -- 50℃
• Storage Temperature: -20 ℃ -- 70 ℃
• Power: 9V -- 18V
• Operating current: 150mA@12V(Typical)
• Power consumption: 1.8W(Typical)
• Dimension: 205mm*110mm*31mm(LxWxH)
• Weight: 350g
OBDII function:
1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are
operating properly and are ready for Inspection and Maintenance testing.
4. Data Stream
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by
the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of
the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently
performed tests from the vehicle's on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring
tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system.
Before using the system test function, refer to the vehicle's service repair manual to determine the procedures
necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification
number (CVN), and other information of the test vehicle.
Contents:
● Main Unit
● Hardcopy User's Manual
● Main cable
● USB cable
● TF Card
● Nylon carry case
● TF Card reader
€184.45
当前 €180.76
库存
Designtek Valvetronic 高级排气系统适用于法拉利 458
代码: 3606008458
Information
Designtek Valvetronic 高级不锈钢排气管，适用于法拉利 458
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
3606008458
您正在查看的产品与这些编号存在交叉引用关系
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
3606008458
3606008458
您正在查看的产品与这些编号存在交叉引用关系
€2,677.50
当前 €2,623.95
由供应商供货