Sports exhaust side silencer straight pipe non valved Porsche 991 GT3 and GT3 RS - 3606609140
3606609140
Product Vehicle Group
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
Information
Sports exhaust side silencer straight pipe (non valved) Porsche 991GT3 and GT3 RS
Bypass pipes for side mufflers.
Fits
Porsche 911 GT3 and GT3 RS (991.1 and 991.2 2014-2019)
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606609140
The product you are viewing cross references to these numbers
Bypass pipes for side mufflers.
Fits
Porsche 911 GT3 and GT3 RS (991.1 and 991.2 2014-2019)
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
Material: Stainless Steel 304
Replacement for Genuine muffler 991.111.048.81
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606609140
99711104782
99711104784
99711104781
99711104882
99711104881
99711104884
The product you are viewing cross references to these numbers
€820.10
Now €803.70
In stock
Related products
Exhaust, Sport GT, Stainless Steel, polished. Replaces the original GT2 exhaust
Code: 99722097345S
Product Vehicle Group
- Porsche 997 GT2 2007>>
- Porsche 997 MKII GT2 RS 2011>>
Information
GT Sport exhaust. Polished stainless steel.
This is a Standard Replacement System Made in Stainless Steel.
Fits:
Porsche 997 GT2 3.6L 07/2004-12/2012
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99722097345S
The product you are viewing cross references to these numbers
This is a Standard Replacement System Made in Stainless Steel.
Fits:
Porsche 997 GT2 3.6L 07/2004-12/2012
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99722097345S
97345S
1620602700
97.345S
99711102680
The product you are viewing cross references to these numbers
€994.87
Now €974.97
In stock
Sports exhaust rear silencer and catalytic converters Porsche 997 GT2 and GT2 RS
Code: TSPOGT2C07.000.A
Product Vehicle Group
- Porsche 997 GT2 2007>>
- Porsche 997 MKII GT2 RS 2011>>
Information
Sports exhaust rear silencer and catalytic converters.
Rear silencer including reduced cell catalytic converter
Fits:
Porsche 997 GT2 and GT2 RS 2007-2012
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
ECU REMAPPING - ENGINE LIGHT
Replacement or removal of components such as catalytic converters, GPFs and electric actuators may cause the engine warning light to come on. In this case, the installer must reprogram the software to eliminate the light
REDUCED CELL CATALYTIC CONVERTER - 200 CELLS
Race catalytic converters have fewer cells than standard factory systems. This reduces exhaust back pressure while still maintaining the operation of the catalytic converter, and improves performance and sound
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION - 1 + 1 AT THE SIDES
The tailpipes are located low down at the sides of the car. There is one tailpipe at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system
EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible
HEAT SHIELDING - INSULATED
Tubi Style ensures maximum protection for components in critical and dangerous positions by using insulation made with the same technology employed by car manufacturers
Rear silencer including reduced cell catalytic converter
Fits:
Porsche 997 GT2 and GT2 RS 2007-2012
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
ECU REMAPPING - ENGINE LIGHT
Replacement or removal of components such as catalytic converters, GPFs and electric actuators may cause the engine warning light to come on. In this case, the installer must reprogram the software to eliminate the light
REDUCED CELL CATALYTIC CONVERTER - 200 CELLS
Race catalytic converters have fewer cells than standard factory systems. This reduces exhaust back pressure while still maintaining the operation of the catalytic converter, and improves performance and sound
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION - 1 + 1 AT THE SIDES
The tailpipes are located low down at the sides of the car. There is one tailpipe at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system
EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible
HEAT SHIELDING - INSULATED
Tubi Style ensures maximum protection for components in critical and dangerous positions by using insulation made with the same technology employed by car manufacturers
€5,464.31
Now €5,355.02
Orderable